Doble acting plough overturning valve with alignment for on land ploughs

TYPE: VRAP SV FS

USING: This valve has been designed for use with two cylinders in sequence for reversible plough to obtain the automatic alignment of load and its overturning. Operating instructions: first the alignment cylinder B starts lining up the load. Once it reaches the end of stroke, the overturning cylinder A starts the rotation. Upon the completion of this the alignment cylinder B takes the plough back into its working position.

MATERIALS AND CHARACTERISTICS:
Body: Zinc-plated steel
Internal parts: hardened and ground steel
Seal: BUNA N standard

These valves are supplied with exchange pressure at 150 bar.

Assembly:Connect C1 to the rod side, C2 to the head side of the rotation cylinder, U1 to the head side and U2 to the rod side of the alignment cylinder. P and T to the machine’s suply. Thanks to its shape, it can be assembled in-line on the hydraulic cylinder or directly fixed onto the plough by the threaded hole in the valve body.